Saltar al contenido

How to disable the SPC TAG

How to disable the SPC TAG

How to disable the SPC PULSETAG2

This article relates to the SPC PULSETAG2 tag model and Google's Find Hub application.

The SPC PULSETAG2 can be disabled so that it stops sharing its location. This means it will stop sending reports to Google's Find Hub network and the owner will stop receiving updates on its location. 

If you receive a message on your Android device indicating that an SPC PULSETAG2 has been detected near you and you are not familiar with this device, you can make this tag sound through the system notification you have received. After locating the device, follow the steps below to deactivate it. The owner will no longer receive updates on the location of this SPC PULSETAG2 and it will no longer trigger unknown tracker alerts.

 

How to Disable:

  • Locate the button on the front of the SPC PULSETAG2.
  • Press the button three times. Then press and hold the button for three seconds. Four beeps will sound.

How to Re-enable:

  • Locate the button on the front of the SPC PULSETAG2
  • Press the button once. Two beeps will sound.

 


 

Cómo desactivar el tag SPC PULSETAG2

 Este artículo está relacionado con el tag modelo SPC PULSETAG2 y la aplicación Find Hub de Google.

 El tag SPC PULSETAG2 se puede desactivar para que deje de compartir su ubicación. De este modo, dejará de enviar informes a la red Find Hub de Google y el propietario dejará de recibir actualizaciones sobre su ubicación. Si recibes un mensaje en tu dispositivo Android indicando que se ha detectado un SPC PULSETAG2 cerca de ti y no estás familiarizado con este dispositivo, puedes hacer que este tag suene a través de la notificación del sistema que ha recibido. Después de localizar el dispositivo, sigue los pasos que se describen a continuación para desactivarlo. El propietario ya no recibirá actualizaciones sobre la ubicación de este SPC PULSETAG2 y ya no se activarán alertas de rastreadores desconocidos.

 

Cómo desactivarlo:

  • Localiza el botón situado en la parte delantera del SPC PULSETAG2.
  • Pulsa el botón tres veces. A continuación, mantén pulsado el botón durante tres segundos. Se oirán cuatro pitidos.

Cómo volver a activarlo:

  • Localiza el botón situado en la parte delantera del SPC PULSETAG2.
  • Pulsa el botón una vez. Se oirán dos pitidos.